This is a kit of all the parts needed to install two NEMA23 motors on the Y axis of an eShapeoko in belt configurations E and F (NEMA23 motors with belts on top of the rail).
Please note that this assumes you already have the parts for belt configuration D (which are supplied with the kit, if you selected NEMA23 for the Y axis). These are only the additional parts needed to switch from NEMA23 with belts-on-the-outside to the more compact belts-on-top configuration. In other words, if you bought your eShapeoko kit with hardware for NEMA17 motors on the Y axis, and now would like to install NEMA23 motors, these parts won't be enough: you'll need this upgrade kit too.
You should already have these parts for the X axis, except the S5-16F screw (bottom motor screw in configuration F). One extra is included for this purpose.
4 × D5-04b — M5 6.35 mm aluminium spacer
8 × D5-02a — M5 3.18mm spacer (thick)
32 × W5 — M5 washer (form A)
8 × S5-18 — M5 18mm cap screw
3 × S5-16F — M5 16mm flanged screw
4 × S5-30F — M5 30mm flanged screw
Images are for illustration only, and show some items not included in this product.